Toshiba TORX177PL Fiber Optic Receiving Module Datasheet

Toshiba TORX177PL Fiber Optic Receiving Module Datasheet - With black mini shutter system package and 5 PIN connection Toshiba TORX177PL Fiber Optic Receiving Module known Toshiba TORX177PL Fiber Optic Receiving Modulesuitable use for Digital Audio optical Interface. 

Its 5 PIN connection consist of Output, GND, Vcc, and two N.C. This device required optical fiber with fiber optic connectors (all plastic fiber with square type connector)

Its PCB thickness recommendation is 1.6 mm. Here are little information sections within Toshiba TORX177PL Fiber Optic Receiving Module Datasheet for such -40 to 70 C storage temperature,

Output Current -1 to 5 mA, Supply voltage -0.5 to 6 V, and 260 C soldering temperature with notes less than 10 seconds in soldering at a distance of 1 mm from the package.

It is recommended 4.75 to 5.75 V of supply voltage for its operating conditions. In data rate characteristics, it is said that when modulated optical high level signal is received, output signal is high; when modulated optical low level signal is received, 

output signal is low; when non-modulated signal(optical all low or all high level signal) is inputted, output signal is not stable according to the datasheet.

Find more complete information about Toshiba TORX177PL Fiber Optic Receiving Module Datasheet here on 5 pages of 212 Kb to download (source: toshiba.com)

Tags: Fiber Optic Datasheet, fiber optic connector,

Related Toshiba TORX177PL Fiber Optic Receiving Module Datasheet Posts in Fiber Optic Category
» ADSL Analog Front End AFE1302 Datasheet for Fiber Optic Devices

Copyright www.unboxing.eu.org