The Accelerometer LIS302DL Datasheet and Electrical Connection Schematic

The Accelerometer LIS302DL Datasheet and Electrical Connection Schematic - Below is the electrical connection schematic of LIS302DL, an MEMS motion sensor 3-axis – ± 2g/± 8g smart digital

LIS302DL electrical connection circuit schematicoutput “piccolo” accelerometer which capable to measure accelerations of 100Hz or 400 Hz output data rate. 

LIS302DL can be applied for a variety of applications such Free-fall detection, Motion activated functions, Gaming and virtual reality input devices, Vibration monitoring and compensation.

Through the I2C/SPI interface, you can see functionality of the LIS302DL and then measure the acceleration data since this device has selectable and accessible functions through the interface. 

Please high-tied of the CS when you use the I2C, according to the datasheet. You can also completely program the functions, the threshold and the timing of the two interrupt pins (INT 1 and INT 2) through the same interface.

On the common design practice, you should place power supply decoupling capacitors (100 nF ceramic, 10 µF Al) as near as possible to the pin 6 of the LIS302DL since through the Vdd line the device core is supplied while the I/O pads are supplied through Vdd_IO line. 

Have complete informations about The Accelerometer LIS302DL Datasheet and Electrical Connection Schematic here in the pdf filetype (source: st.com).

Tags: Accelerometer Datasheet, motion sensor, piccolo, I2C Interface, accelerations,

Related The Accelerometer LIS302DL Datasheet and Electrical Connection Schematic Posts in Accelerometer Category
» LGA Accelerometer Sensor Guideline for Soldering and Mounting to PCB
» Colibrys MS9000 Inertial Accelerometer Pin Diagram and Description
» SCA1000/1020 Series Datasheet, The 2-Axis Automotive Analog Accelerometer
» The SCA3000-D01 Accelerometer Datasheet and PIN Descriptions

Copyright www.unboxing.eu.org